Smart Card reader, RFID Reader in a small form factor for desktop as well as mobile usage.                  Smart Card RFID Reader supports all major operating systems. High speed data transmission.

Showing 1–24 of 41 results

blueLINE RBH-BFR-350 Fingerprint Reader Series

Award Winning Biometric Finger print reader with built in13.56mhz Smart card reader for Finger print and or smart card verification. Uses Mifare or Desfire encrypted credentials, RBH NFC and Bluetooth mobile credentials with Weigand output

Compatible with

blueLINE RBH-N86 Single Gang Reader Series

Award-winning Single Gang Mount 13.56mhz Smart card reader with bluetooth and NFC technology to support RBH mobile credentials. Weigand or OSDP output.

Compatible with

 

blueLINE RBH-NK86 Keypad Reader Series

Award-winning Single Gang Mount 13.56mhz Smart card reader with Keypad/Pinpad for dual authentication or Pin operation, bluetooth and NFC technology to support RBH mobile credentials. Weigand or OSDP output.

 

CHERRY TC 1100

 

CHERRY TC 1100 – the reliable solution for bi-directional communication with contact smart cards. The design: intelligent. The operation: with one hand. The workmanship: high quality.

  • Class 1 smart card terminal
  • Bi-directional communication for contact smart cards
  • Status indication via LED
  • High-quality workmanship, up-to-date technology and intelligent design
  • One-hand operation through card guide in housing and anti-slip protection via rubberized surfaces
  • Data exchange via sliding contact with approx. 100,000 mating cycles
  • Connection via USB 2.0 interface
  • 1.75 m cable length for maximum freedom of movement
  • Software support for the operating systems Microsoft Windows, Linux and Mac OS X.
  • Supported standards: PC / SC, CCID, CT-API
  • EMC 2000 Level 1 approval
  • Meets the requirements of FIPS-201

CHERRY TC 1200 Contactless NFC Card Reader

 

CHERRY TC 1200 – the reliable solution for bi-directional communication with contactless chip cards. The design: intelligent. The operation: with one hand. The workmanship: high quality.

  • Class 1 smart card terminal
  • Bi-directional communication for contactless smartcards
  • Status indication via LED
  • High-quality workmanship, up-to-date technology and intelligent design
  • One-handed operation and anti-slip over rubberized surfaces
  • Attachable card clip for fixing contactless smart cards
  • Connection via USB 2.0 interface
  • 1.75 m cable length for maximum freedom of movement
  • Software support for the operating systems Microsoft Windows, Linux and Mac OS X.
  • Supported standards: PC / SC, CCID, CT-API
  • DE_CHERRY_TC_1200

EMV Smart Card Reader

$24.99

EMV SmartCard Reader Model: SA1100PLUS

DOD Military USB Common Access CAC Smart Card Reader

Card compatibility:
– Support banks, post office, DOD, U.S. Gov. can be use chip cards issued all over the country. SA1100Plus
– Can be used for Common Access Card, Government ID, National ID.
– For all contact smart card operations like online-banking or digital signature applications: ActivClient, AKO, OWA, DKO, JKO, NKO, BOL, GKO, Marinenet, AF Portal, Pure Edge Viewer,ApproveIt, DCO, DTS, LPS, Disa Enterprise Email etc.
– Compatible with a wide variety of smart card operations for digital authentication and security, Network ATM transfer, payment, balance inquiries, Tax, water, electricity payment, Credit card bill payment, cash card payment.

SmartCard America Brand. Approved by FCC.

Specification:
– Card types: 5V, 3V and 1.8V Smart Cards, ISO 7816 Class A, B and C
– Certifications Standards: ISO-7816 & EMV2 2000 Level 1, CE, FCC, Microsoft WHQL.

432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via
external EEPROM
Support ISO7816 Class A, B and C (5V/3V/1.8V) card
Implemented as an USB full speed device with bulk transfer endpoint, Mass
Storage endpoint
Built-in PLL for USB and Smart Card clocks requirement
Support EEPROM for USB descriptors customization (PID/VID/ iManufacturer/
iProduct/Serial Number), Direct Web Page Link, and accessing memory card
module.
EEPROM programmable via USB interface
Support software update for memory card module
Support Direct Web Page Link via configuration in external EEPROM
Support short APDU and extended APDU
Compatible with Microsoft USB-CCID driver
Support remote wake up through inserting card/removing card
Support USB selective suspend
Support Power Saving Mode (Using one pin to select between Normal/PWR
Saving Mode)

Tip:
If you can not download the driver, please contact me.

Kindly Note:
1. DOD and USG users note you will need a third-party CAC Enabler program.
2.Java is necessary for MAC user. Please install Java firstly on Java’s official website, also you can find related link on smart card page of our website.
3.SIM Card can be compatible with Windows Only.

Quote Request

or

Please call 1-800-537-1708

 

HID Reader 920NTNNEK00000

Part Number: 920NTNNEK00000

HID GLOBAL, READER, R40, ICLASS, SE REV E, NO PROX, STD, WIEGAND, TERM, BLK, STD 1 SECURITY, LED RED, FLASH GRN, BZR ON, IPM OFF, 32 BIT

IDENTIV Primis Access Control Readers

Entry-level access control gets you up and
running in less than ten minutes.
Identiv’s Primis Access Control
Readers are secure, flexible, simple
to configure, and enhance any
access control environment without
a costly investment. Primis brings
the latest technology to traditional
access control systems by supporting
both smart card and proximity-based
access control credentials.
Primis is available in three (3) different
finishes (matte black, gloss black, or
matte white) granting even greater
flexibility to meet the needs of a
specific installation. Customers or
sites requiring customization can
request unique faceplates using the
Primis Premiere program, providing
greater brand exposure.
Plug-and-play Primis is designed
to work in the government or
commercial space and is ideal for
schools, banks, apartment complexes,
retail establishments, or any
environment that:
• Uses multiple credential populations
(i.e., proximity and smart card)
• Needs to migrate from one
credential technology to another
• Requires support for single-site,
multi-tenant access control systems

DATASHEET  

IDENTIV uTrust TS Reader

Identiv’s uTrust TS Reader Family features multiple layers of security based on a certified hardware security element and provides Wiegand and RS-485 communications for interoperability with most systems. The readers work with system changes and alterations, such as expansion, corporate mergers, or simply the desire to increase a facility’s security. From corporate campuses or universities to complex environments, uTrust TS supports entire populations of users.

uTrust TS Reader Family
Solid Performance Merges with High Security
Mullion, Wall Mount, and Keypad
Identiv’s uTrust TS Reader Family is designed to offer system integrators and users robust performance and maximum flexibility.
uTrust TS Readers work with system changes and alterations, such as expansion, corporate mergers, or simply the desire to
expand and increase a facility’s security. From corporate campuses or universities to complex environments, uTrust TS fully
supports entire populations of access control users.
In addition to proximity and smart cards, uTrust TS Readers support TS Cards, highly secure standards-based credentials.
Strong authentication ensures that information is transferred only after the system has determined that both parties in the
system are trustworthy and has validated that the data can be transferred securely.
ONE READER, ALL MAJOR CREDENTIALS
Configurations to support all major formats, from legacy
proximity to secure credentials
HIGHLY SECURE
Multiple layers of security based on a certified hardware security
element
COMMUNICATION FLEXIBILITY
Provides Wiegand and RS-485 communications for
interoperability with most systems
INTEROPERABILITY BASED ON OPEN STANDARDS
Based on strong security without compromising interoperability

DATASHEET  

RBH blueLINE RBH M45 Mullion Reader Series

Award-winning Mullion Mount 13.56mhz Smart card reader with bluetooth and

NFC technology to support RBH mobile credentials. Weigand or OSDP output.

M45 / M45-DNB Series

The RBH-M45 mullion mount reader reads 13.56mhz mifare or Desfire encrypted cards and tags for the highest level of security.

These readers can also be ordered with Bluetooth and NFC capability for the ability to read RBH UHSC mobile credentials

(available for free in the App store). The readers come standard with 50 bit wiegand output and can be ordered with 34 bit

output for third party systems. For ultra secure installations readers can be ordered with OSDP1 & 2 capability.

All readers are potted for indoor and outdoor use.

 

Smart Card reader, RFID Reader