Showing 1–50 of 86 results

A Atmel T5577 Proximity Card

The ATA5577 is a contactless read/write identification IC (IDIC®) for applications in the 125-kHz or 134-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag. The on-chip 363-bit EEPROM (11 blocks with 33 bits each) can be read and written block-wise from a base station (reader). Data is transmitted from the IDIC (uplink) using load modulation. This is achieved by damping the RF field with a resistive load between the two terminals Coil 1 and Coil 2. The IC receives and decodes serial base station commands (downlink), which are encoded as 100% amplitude modulated (OOK) pulse-interval-encoded bit streams. A complete datasheet with further technical data is available on request. Please contact your local sales office.  

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF

 A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

ALIEN HIGGS-3 RFID Labels or Card

The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.

  • Exceptional performance.
  • EPC Gen 2 (v1.2.0) compliant.
  • ISO/IEC 18000-6C compliant.
  • Worldwide RFID UHF operation (840-960MHz).
  • Higgs-3 IC with 800-bits of Nonvolatile Memory.
  • Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
  • User Memory can be Block Perma-Locked.
  • User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
  • Supports all Mandatory and Optional Gen 2 commands including item level
  • Custom commands for high speed programming.
  • Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.

Alien Squiglette RFID Inlay, Labels, Card ALN-9730, Higgs-4

Powered by Alien®’s break-through Higgs™3 UHF RFID IC and innovative Squiglette antenna design, the ALN-9630 delivers industry leading EPC Gen 2 performance and reliability in a narrower width than it’s bigger brother, the Squiggle®, and makes it ideal for apparel applications. ALN-9630 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the Squiglette delivers excellent performance and a rich feature set expanding the standard 32-bit TID with an additional 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modification of the tag’s data. SPECIFICATIONS ELECTRICAL: Air Interface Protocol: EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) Operating Frequency: Global 840-960 MHz IC Type: Alien Higgs-3 Memory: EPC 96 bits, User 512 bits, TID 64 bits EPC Memory Content: Unique, randomized number Max Read Distance: > 3.04 m (10 ft) Applicable Surface Materials: Wood, plastic, glass, cardboard MECHANICAL: Tag Form Factor: White wet inlay Tag Materials: TT printable white film Attachment Method: General purpose adhesive Dimensions: 2.87 x 0.5 in (73 x 12.7 mm) Weight: < 1 g ENVIRONMENT: Operating Temperature: -40° to +70°C

AT45DB041 Card

 

AT45DB041 Card

[themify_button style=”large green rounded” link=”https://smartcardamerica.com/?page_id=16650″ text=”#ffffff” target=”_blank” ]Request Quote[/themify_button]

AT45DB041D

Features
• Single 2.5V or 2.7V to 3.6V Supply
• RapidS Serial Interface: 66 MHz Maximum Clock Frequency
– SPI Compatible Modes 0 and 3
• User Configurable Page Size
– 256 Bytes per Page
– 264 Bytes per Page
– Page Size Can Be Factory Pre-configured for 256 Bytes
• Page Program Operation
– Intelligent Programming Operation
– 2,048 Pages (256/264 Bytes/Page) Main Memory
• Flexible Erase Options
– Page Erase (256 Bytes)
– Block Erase (2 Kbytes)
– Sector Erase (64 Kbytes)
– Chip Erase (4 Mbits)
• Two SRAM Data Buffers (256/264 Bytes)
– Allows Receiving of Data while Reprogramming the Flash Array
• Continuous Read Capability through Entire Array
– Ideal for Code Shadowing Applications
• Low-power Dissipation
– 7 mA Active Read Current Typical
– 25 μA Standby Current Typical
– 15 μA Deep Power-down Typical
• Hardware and Software Data Protection Features
– Individual Sector
• Sector Lockdown for Secure Code and Data Storage
– Individual Sector
• Security: 128-byte Security Register
– 64-byte User Programmable Space
– Unique 64-byte Device Identifier
• JEDEC Standard Manufacturer and Device ID Read
• 100,000 Program/Erase Cycles Per Page Minimum
• Data Retention – 20 Years
• Industrial Temperature Range
• Green (Pb/Halide-free/RoHS Compliant) Packaging Options

 

Quote Request

AT88SC0204C Card

AT88SC0204C Card

AT88SC0204C, CryptoMemory 2 Kbit

Features
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 2-Kbit (256 Bytes) EEPROM User Memory

– Four 64-byte (512-bit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under License of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

 

AT88SC0404C Card

AT88SC0404C Card

AT88SC0404C, CryptoMemory 4 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC0808C Card

AT88SC0808C Card

AT88SC0808C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC102 Card

AT88SC102 Card

Features
• 1K X 1 Serial EEPROM with Security Logic
• Two Application Zones
• Stores and Validates Security Codes
• Maximum of Eight Incorrect Security Code Attempts
• Provides Transport Code Security
• Low Voltage Operation: 2.7V to 5.5V
• Manufactured using Low Power CMOS Technology
• Supports ISO/IEC 7816-3 Synchronous Protocol
• VPP Internally Generated
• 2 μs Read Access Time; 2 ms Write Cycle Time
• Temperature Range from -40°C to 85°C
• ESD Protection 4,000V Minimum.
• High Reliability:
100,000 Program/Erase Cycles Guaranteed
Data Retention of 10 years

Quote Request

AT88SC12816C Card

AT88SC12816C Card

AT88SC12816C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

AT88SC153 Card

AT88SC153 Card

Features
• One 64 x 8 (512-bit) Configuration Zone
• Three 64 x 8 (512-bit) User Zones
• Programmable Chip Select
• Low-voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 8-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-reset Register
• High-security Memory Including Anti-wiretapping

– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Secure Checksum
– Configurable Authentication Attempts Counter
– Two Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Four Password Attempts Counters
– Selectable Access Rights by Zone

• ISO Compliant Packaging
• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V min

• Low-power CMOS

Quote Request

AT88SC1608 Card

AT88SC1608 Card

Features
• One 128 x 8 (1K bit) Configuration Zone
• Eight 256 x 8 (16K bits) User Zones
• Low Voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 16-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-Reset Register
• High Security Memory Including Anti-wiretapping

– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Authentication Attempts Counter
– Eight Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Sixteen Password Attempts Counters
– Selectable Access Rights by Zone

• ISO Compliant Packaging
• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V (min)

• Low-power CMOS

Quote Request

AT88SC1616C Card

AT88SC1616C Card

AT88SC1616C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC25616C Card

AT88SC12816C Card

AT88SC12816C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

 

AT88SC3216C Card

AT88SC3216C Card

AT88SC3216C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC6416C Card

AT88SC6416C Chip Card

This AT88SC6416C White Gloss PVC card, is part of Atmel’s CryptoMemoryTM family of products. This new family of secure circuits offers a high security chip solution that fills the void between plain serial memories and microprocessors. It’s applications include ID cards, driving licenses, insurance cards, access control, administrative cards, campus cards, voting machines, e-purse, loyalty, energy meters, parking meters, transaction records and multi applications.

DATASHEET

Quote Request

Atmel AT24C02-ET Card

Features
• Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
1024 x 8 (8K) or 2048 x 8 (16K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• Automotive Devices Available
• 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead
SOT23, 8-lead TSSOP and 8-ball dBGA2 Packages
• Die Sales: Wafer Form, Waffle Pack and Bumped Wafers

Description
The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial
electrically erasable and programmable read-only memory (EEPROM) organized as
128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT24C01A/02/04/08A/16A is available in space-saving 8-lead
PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead SOT23
(AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages and is
accessed via a Two-wire serial interface. In addition, the entire family is available in
2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) versions.

Atmel AT93C46A Card

The AT93C46 provides 1024 bits of serial electrically erasable programmable read
only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG pin is
connected to VCC and 128 words of 8 bits each when it is tied to ground. The device
is optimized for use in many automotive applications where low power and low voltage
operations are essential.

Please Call Us For Quote!

Toll Free: 1-800-537-1708

EM4100 Card

$45.99$612.99

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4100 Card

The EM4100 (previously named H4100) is a CMOS
integrated circuit for use in electronic Read Only RF
Transponders. The circuit is powered by an external coil
placed in an electromagnetic field, and gets its master
clock from the same field via one of the coil terminals. By
turning on and off the modulation current, the chip will send
back the 64 bits of information contained in a factor y preprogrammed
memory array.
The programming of the chip is performed by laser fusing
of polysilicon links in order to store a unique code on each
chip.

Features
□ 64 bit memory array laser programmable
□ Several options of data rate and coding available
□ On chip resonance capacitor
□ On chip supply buffer capacitor
□ On chip voltage limiter
□ Full wave rectifier on chip
□ Large modulation depth due to a low impedance
modulation device
□ Operating frequency 100 – 150 kHz
□ Very small chip size convenient for implantation
□ Very low power consumption
Applications
□ Logistics automation
□ Anticounterfeiting
□ Access control
□ Industrial transponder

EM4100 DATASHEET

 

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF 

 A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

EM4100 KEY FOB

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4100 WRISTBAND

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4200 Card

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF

A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

EM4200 Card, Key Fobs

EM4200 Card, Key Fobs

Introduction :

    • This RFID key-fob card is for RFID Proximity access control system keypad, with unique digit ID number in each key-fob card (This RFID card is read only and not rewritable.) which make it possible to records by the control system to implement the pre-set function such as door open , password management. 125KHz Proxy Card

Application:
These products are widely applied in access control system and related applications .

Specification :

  • Pre-programmed with unique digit ID number in each key fob card (This RFID card is read only and not rewritable.)
  • Frequency : 125KHz
  • Standard : EM4100 compatible
  • Contactless transmission of data
  • Material : PVC
  • Reading Distance: 5cm ~ 12cm
  • size: 85.6*54*0.76mm
  • weight:5.77g/PCS
  • Waterproof

EM4200 KEY FOB

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET

EM4200 WRISTBAND

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET
  • RIFD Wristband Catalog