Infineon SLE 66CLX800PE Card (JCLX80JTOP20ID)  Infineon SLE 66CLX800PE Card (JCLX80JTOP11ID)  Infineon SLE 66CLX800PE Card (PCLX80TCOS12ID)  Infineon SLE 66CLX800PE Card (PCLX80TCOS11ID)  The dual interface security controllers SLE 66CLX800PE(M) belong to the family of the Infineon Technologies SLE 66CxxxPE high-end security controller family in 0.22 µm CMOS technology which are designed for contactless security systems that requires continuous ongoing improvements with the highest degree of protection against fraudulent attacks. SLE 66CLX800PE(M) is targeting dual interface and pure contactless smart card applications such as national electronic passports, ID cards, banking, security access, digital signature, SIM cards with embedded contactless interface and transport. SLE 66CLX800PE(M) offers 240 Kbytes of User-ROM, 256 bytes internal RAM, 6 Kbytes XRAM, 700 bytes Crypto RAM and 80 Kbytes EEPROM, which can be used as data and as program memory. The non-volatile memory consists of high reliability cells to guarantee data integrity. This is especially important when the EEPROM is used as program memory. It features ISO/IEC 14443 Type B contactless interfaces and Type A and ISO/IEC 7816 contactbased interface on a single chip that can be operated in parallel to answer the need of the upcoming mobile phones with a contactless interface . They also support symmetric and asymmetric public-key algorithms such like DES, 3DES, Elliptic Curves and RSA independently of the communication mode.

Solutions for rising security demands

DATASHEET

Infineon SLE 78CLX360P Card (Type: SLJ52GCA036BL /CL/DL) Infineon SLE 78CLX360P Card (Type: SLJ52GDL036CL/DL) Infineon SLE 78CLX360P Card (Type: SLJ52GLA036AL) SLE 78CLX360P 16-bit Security Controller with “Integrity Guard”, optimized for Contactless and Dual-Interface Payment and Identification applications in 0.13 μm CMOS technology 36 kBytes E²PROM, 224 kBytes User ROM, 8 kBytes RAM ISO/IEC 7816 and 14443 Type B & A Compliant Interfaces Contactless interface acc. ISO/IEC 18092 passive mode Crypto@2304T engine with register lengths of up to 2304 bits, certified RSA and ECC libraries Symmetric Crypto Processor (SCP) Triple-key-triple-DES and AES acceleration  

  Intelligent 2.5 Kbit EEPROM with Contactless Interface (ISO/IEC 15693 and ISO/IEC 18000-3 mode 1) Features Contactless Interface • Physical Interface and Anticollision compliant to ISO/IEC 15693 and ISO/IEC 18000-3 mode 1 — contactless transmission of data and supply energy — carrier frequency: 13.56 MHz — data rate up to 26 kbit/s — anticollision with identification of up to 30 tags/sec — read / write distance up to 150 cm depending on reader antenna configuration 2.5 Kbit EEPROM • ISO mode – block organization of memory — up to 56 blocks of user memory (block size 4 bytes) • Custom mode – page organization of memory — up to 32 pages of user memory (page size 8 bytes) • Unique chip identification number (UID) • EEPROM programming time per block/page < 4 ms • EEPROM endurance > 100,000 erase/write cycles1) • Data retention > 10 years1) Value Counters: up to 65536 (value range from 0 to 216-1) — each page in the User Area is configurable as a Value Counter — support of Anti-Tearing Electrical characteristics • ESD protection minimum 2 kV • Ambient temperature –25 … +70°C (for the chip) The my-d® products are designed to meet increased demands for security and design flexibility. The family of contactless memory my-d® supplies the user with different memory sizes and incorporates security features to enable considerable flexibility in the application design. The functional architecture, meaning the memory organisation and authentication of my-d® products is the same for both, my-d® proximity (ISO/IEC 14443) and my-d® vicinity (ISO/IEC 18000-3 mode 1 or ISO/IEC 15693). This eases the system design and allows simple adaptation between applications. All my-d® products are available in plain mode with open memory access and in secure mode with memory access controlled by authentication procedures. Flexible controls within the my-d ICs start with plain mode operation and individual page locking for more complex applications various settings in secure mode can be set for multi user / multi application configurations. In secure mode a cryptographic algorithm based on 64-bit key is available. Mutual authentication, message authentication codes (MAC) and customized access conditions protect the memory against unauthorized access. Configurable value counters featuring anti-tearing functionality are suitable for value token applications, such as limited use transportation tickets. Architectural interoperability of all my-d® products enables an easy migration from simple to more demanding applications. In addition, the my-d® light (ISO/IEC 18000-3 mode 1 or ISO/IEC 15693) is part of the my-d® family. Its optimized command set and memory expands the range of applications to cost sensitive segments.