Showing 51–100 of 758 results

AWID LR 2000 Long Range Reader Series

AWID LR-2000 Long Range Reader Series

AWID Sentinel-Prox™ Long-Range Reader – LR-2000 is a UHF RFID reader with an integrated fine-tuned antenna. The LR-2000 is optimally designed for Automatic Vehicle Identification (AVI) and Access Control applications such as parking entry and gate control.

Compatible with

AWID MR 1824 Proximity Reader Series

AWID MR-1824 Proximity Reader Series

AWID 125 kHz Proximity Reader with 18 to 24 inch Read Range

AWID SP-6820 Proximity Reader Series

AWID SP-6820 Proximity Reader Series

AWID single gang, Keypad 125 kHz Proximity Reader 6 to 8 inch read range

AWID SR 2400 Proximity Reader Series

AWID SR-2400 Proximity Reader Series

AWID 125 kHz Proximity Reader 4 – 5.5 inch read range

AX-NURC-2002

2-door expansion controller, with a smaller footprint than the AX-NIRC-2000, for Axiom systems.

The AX-NURC-2002 Universal Expansion Controller allows control of two doors.

It includes one AX-NURC-2002-B controller board installed in an ENCL-1-PS enclosure.

 

 

 

 

Compatible with

AX-NURC-2004

4-door expansion controller for Axiom systems.

 

The AX-NURC-2004 Universal Expansion Controller allows control of four doors.

It includes two AX-NURC-2002-B controller boards installed in an ENCL-1-PS enclosure.

 

 

 

 

 

Compatible with

AxiomXa Software

AxiomXa

Enterprise Security Management System

Bringing together different aspects of security management can be challenging. Axiom stands up to the challenge by combining Access Control and Alarm Monitoring with Video, Building management automation, Asset tracking, Guard tour and Visitor management, and many more important security functions into an elegant and versatile security management solution.

blueLINE RBH-BFR-350 Fingerprint Reader Series

Award Winning Biometric Finger print reader with built in13.56mhz Smart card reader for Finger print and or smart card verification. Uses Mifare or Desfire encrypted credentials, RBH NFC and Bluetooth mobile credentials with Weigand output

Compatible with

blueLINE RBH-N86 Single Gang Reader Series

Award-winning Single Gang Mount 13.56mhz Smart card reader with bluetooth and NFC technology to support RBH mobile credentials. Weigand or OSDP output.

Compatible with

 

blueLINE RBH-NK86 Keypad Reader Series

Award-winning Single Gang Mount 13.56mhz Smart card reader with Keypad/Pinpad for dual authentication or Pin operation, bluetooth and NFC technology to support RBH mobile credentials. Weigand or OSDP output.

 

Card Printer – SmartCard America HID8500

$6,899.99

Part Number: 088552

 

HID GLOBAL, HDP8500 BASE MODEL CARD PRINTER, DUAL-SIDED, 32MB MEMORY, THREE YEAR PRINTER WARRANTY, LIFETIME PRINTHEAD WARRANTY

HID® FARGO® HDP8500 Industrial & Government ID Card Printer & Encoder.

Fargo HDP8500 Laminator – Dual-Sided (not Included)

Free Shipping.

The HID FARGO HDP8500 industrial ID card printer and encoder is the superior industrial ID printer for extended-run, high throughput ID personalization and issuance. It’s especially suited for large government ID card programs and laborious service bureau conditions, as well as demanding university and large enterprise environments.

Solid metal cabinetry and precision-engineered interior components create a stable printer environment that operates reliably over continuous runs. In fact, the HDP8500 industrial card printer and encoder is loaded with features that maximize card yield per shift: multi-card processing capabilities, 400-card input hopper capacity, accessible card path and graphical touch screen interface, and built-in physical and electronic security features. These features are all designed to ensure continuous production, even in the most demanding environments. Combined with the included HID FARGO Workbench diagnostic utility facilitates printer maintenance. Its Color Assist tool matches spot colors, ensuring accurate prints of graphics such as company logos.

The HID FARGO HDP8500 ID Card Printer and Encoder features optional modules to provide you with additional security, such as the interoperable Lamination module; the Laser Engraver module for the highest level of secure card printing; and the Laser Writer module to create vanGO® cards that feature a unique visual security patch that writes the cardholder’s image to the card so that it cannot be counterfeited. Also optionally available is the High Durable HDP film that can be used to create even more robust and durable credentials.

For high duty-cycle performance, the FARGO HDP8500 Industrial ID Card Printer and Encoder delivers:

  • System reliability over continuous runs
  • High-volume card throughput for maximum yields per shift
  • Operational convenience to optimize uptime
  • Issuance security that meets industry standards
  • Additional on-card visual security with the HDP8500 LaserWriter module and vanGO ID cards to create a One-2-One™ relationship between the card and the cardholder that is nearly impossible to counterfeit

FARGO HDP8500 Industrial & Government ID Card Printer and Encoder Applications

  • Government-to-citizen IDs:
    • Driver Licenses
    • National IDs
    • Border crossing cards
    • Voter registration
  • Service bureau ID production
  • University student ID/payment cards

    Click: HID Fargo-hdp8500-printer-br-en

CHERRY TC 1100

 

CHERRY TC 1100 – the reliable solution for bi-directional communication with contact smart cards. The design: intelligent. The operation: with one hand. The workmanship: high quality.

  • Class 1 smart card terminal
  • Bi-directional communication for contact smart cards
  • Status indication via LED
  • High-quality workmanship, up-to-date technology and intelligent design
  • One-hand operation through card guide in housing and anti-slip protection via rubberized surfaces
  • Data exchange via sliding contact with approx. 100,000 mating cycles
  • Connection via USB 2.0 interface
  • 1.75 m cable length for maximum freedom of movement
  • Software support for the operating systems Microsoft Windows, Linux and Mac OS X.
  • Supported standards: PC / SC, CCID, CT-API
  • EMC 2000 Level 1 approval
  • Meets the requirements of FIPS-201

CHERRY TC 1200 Contactless NFC Card Reader

 

CHERRY TC 1200 – the reliable solution for bi-directional communication with contactless chip cards. The design: intelligent. The operation: with one hand. The workmanship: high quality.

  • Class 1 smart card terminal
  • Bi-directional communication for contactless smartcards
  • Status indication via LED
  • High-quality workmanship, up-to-date technology and intelligent design
  • One-handed operation and anti-slip over rubberized surfaces
  • Attachable card clip for fixing contactless smart cards
  • Connection via USB 2.0 interface
  • 1.75 m cable length for maximum freedom of movement
  • Software support for the operating systems Microsoft Windows, Linux and Mac OS X.
  • Supported standards: PC / SC, CCID, CT-API
  • DE_CHERRY_TC_1200

Credit & Debit Card

EMV Credit & Debit Card

Smart Card production for banking organizations and financial institutionsrequires high technical expertise, ability, and skill. As a leading company in credit card production, SmartCard America represents new standards for banking cards featuring EVM, dual interface, RFID, and all technologies for the financial sector.

Experience and know-how developed over the years made SmartCard America one of the most reliable companies in the field of quality banking card production, collaborating with many customers in the financial sector worldwide.

SmartCard America can compete globally in the increasingly complex and dynamic market for payment systems with credit-debit cards ensured with the highest level of service.

Our quality standards and long experience in the credit and prepaid card production made us a leading company supporting and assisting financial institutions with the latest technologies, including EMV card compliant with Visa and Master card, including RFID / NFC card and cards with dual interface technology.

PRODUCTS

SmartCard America, with its dedicated factory, product portfolio, and comprehensive services, can provide full support for:

  • Manufacturing of credit/debit cards and financial cards, which comply with the EMV card standards from Visa and MasterCard
  • RFID card production for contactless payments in accordance with EMV standards
  • Personalization of banking card through embossing, infilling, thermal transfer, etc.
  • Activation of dual interface cards with contact and contactless microchips, and encoding of magnetic stripes
  • Production of prestigious card carriers (packaging and mailing)
  • Creative fulfillment
  • Logistics services: handling of distribution

Contact Us

or 

Call please 1-800-537-1708

CUSTOM AMERICA SM600 SCANMATIC PRESENTATION SCANNER

$229.99

CUSTOM AMERICA, SM600 SCANMATIC PRESENTATION SCANNER

CHARACTERISTICS

  • Scans most 1D and 2D barcodes on paper, mobile phones and computer displays
  • With the most compact size and small foot-print can fit in constrained areas
  • Support hands-free and handheld scan
  • Multi-code mode allows simultaneous scanning of a group of barcodes
  • Scanner head can be forward and backward adjusted in a total 180° range to accommodate to your application
  • Available configuration tool and data formatting functionality eliminating the need for host system modifications
  • Both contact and air 20KV Electro-Static discharge
  • Lightweight and ergonomic design
  • Side touch power button

DATASHEET

 

 

CUSTOM AMERICA, EVO 2D Omni Barcode Scanner, USB

$287.99

CUSTOM AMERICA, EVO 2D OMNI BARCODE SCANNER, USB INTERFACE, CABLE INCLUDED, PREVIOUSLY PART # EVO-PS1-ADU

 

DATASHEET

DATALOGIC ADC DOCK SINGLE PT# 94A150081

$179.99

Part Number: 94A150081

DATALOGIC ADC, DOCK, SINGLE, DESK (RS-232/ MICRO USB) WITH CLEANABLE PLASTICS, SLOT FOR CHARGING SPARE BATTERY, REQUIRES POWER SUPPLY 94ACC1381

DATALOGIC ADC, GRYPHON GBT4500 PT# GBT4500-HC-BTK1

$779.99

Part Number: GBT4500-HC-BTK1

DATALOGIC ADC GRYPHON GBT4500 KIT USB HEALTH CARE (KIT INCLUDES SCANNER WLC4090-HC-BT BASE AND USB CABLE 90A052278)

DATASHEET

DATALOGIC ADC, GRYPHON GM4500 PT# GM4500-HC-910K10-B

$789.99

Part Number: GM4500-HC-910K10-B

DATALOGIC ADC, GRYPHON GM4500, KIT, USB, 910 MHZ, HEALTHCARE, BPOC (KIT INCLUDES SCANNER, WLC4090-HC-910 BASE AND USB CABLE 90A052278)

DATALOGIC ADC, GRYPHON GM4500, 2D MP IMAGER, 910MHZ, WIRELESS CHARGING, HEALTHCARE PT# GM4500-HC-910-WLC

$519.99

Part Number: GM4500-HC-910-WLC

DATALOGIC ADC GRYPHON GM4500 2D MP IMAGER 910MHZ WIRELESS CHARGING HEALTHCARE Part Number GM4500-HC-910-WLC

DATALOGIC ADC, MEMOR 10 HC FULL TOUCH PDA PT# 944350005

$999.99

Part Number: 944350005

 

DATALOGIC ADC, MEMOR 10 HC FULL TOUCH PDA, NA, WI-FI + LTE, ULTRA SLIM 2D IMAGER W/ GREEN SPOT, ANDROID V8.1 WITH GMS, WHITE

DATASHEET 

Datalogic Extended Capacity 5000mAh Battery Part Number: 94ACC0101

$119.99

 

Part Number 94ACC0101

DATALOGIC ADC BATTERY EXTENDED CAPACITY (5000MAH) WITH CLEANABLE PLASTICS

DATALOGIC, GRYPHON I GD4590, 2D MPIXEL IMAGER PT# GD4590-HCK10-BPOC

$329.99

Part Number: GD4590-HCK10-BPOC

DATALOGIC GRYPHON I GD4590 2D MPIXEL IMAGER USB/RS-232/WEDGE MULTI-INTERFACE BPOC KIT HC (KIT INCLUDES SCANNER AND USB CABLE 90A052278)

DATASHEET 

 

DATALOGIC, MEMOR 20 PT # 944800004

$1,429.99

Part Number: 944800004

 

DATALOGIC, MEMOR 20, PDA, FULL TOUCH, HEALTHCARE, WIFI, ULTRA SLIM 2D IMAGER W GREEN SPOT, ANDROID V9, GMS, WHITE, BATTERY, USB CABLE, HAND STRAP

MEMOR™ 20 – DARE TO BE THE BEST
Memor 20: the best-in-class PDA born to face the toughest Enterprise challenges.
Offered in a slim and compact design, a stunning 5.7” full HD display, and a novel
and unique secondary notification display. It incorporates the latest smartphone
technologies, combined with high performance 1D/2D barcode scanning and
industrial robustness for almost any indoor or outdoor environment.
TOP PERFORMANCE WHILE EXTREMELY RUGGED 

DATASHEET 

EM4100 Card

$45.99$612.99

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4100 Card

The EM4100 (previously named H4100) is a CMOS
integrated circuit for use in electronic Read Only RF
Transponders. The circuit is powered by an external coil
placed in an electromagnetic field, and gets its master
clock from the same field via one of the coil terminals. By
turning on and off the modulation current, the chip will send
back the 64 bits of information contained in a factor y preprogrammed
memory array.
The programming of the chip is performed by laser fusing
of polysilicon links in order to store a unique code on each
chip.

Features
□ 64 bit memory array laser programmable
□ Several options of data rate and coding available
□ On chip resonance capacitor
□ On chip supply buffer capacitor
□ On chip voltage limiter
□ Full wave rectifier on chip
□ Large modulation depth due to a low impedance
modulation device
□ Operating frequency 100 – 150 kHz
□ Very small chip size convenient for implantation
□ Very low power consumption
Applications
□ Logistics automation
□ Anticounterfeiting
□ Access control
□ Industrial transponder

EM4100 DATASHEET

 

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF 

 A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

EM4100 KEY FOB

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4100 WRISTBAND

EM4100 (previously named is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor pF is also integrated. Features 64 bit memory array laser programmable Several options of data rate and coding available On chip resonance capacitor On chip supply buffer capacitor On chip voltage limiter Full wave rectifier on chip Large modulation depth due to a low impedance modulation device Operating frequency – 150 kHz Very small chip size convenient for implantation Very low power consumption Applications Logistics automation Anticounterfeiting Access control Industrial transponder Coil terminal / Clock input Coil terminal Parameter Maximum DC Current forced & COIL2 Power Supply Storage Temp. Die form Storage Temp. PCB form Electrostatic discharge maximum to MIL-STD-883C method 3015 Symbol ICOIL VDD Tstore VESD Conditions +125°C 1000V The AC Voltage on Coil is limited by the on chip voltage limitation circuitry. This is according to the parameter Icoil in the absolute maximum ratings. Parameter Operating Temp. Maximum Coil Current AC Voltage on Coil Supply Frequency Symbol Top ICOIL Vcoil fcoil Min. -40 Typ. Max. Units 10 mA Vpp kHz Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions max affect device reliability or cause malfunction. This device has built-in protection against high static voltages or electric fields; however due to the unique properties of this device, anti-static precautions should be taken as for any other CMOS component. Electrical Characteristics VDD = 1.5V, VSS = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Parameter Supply Voltage Rectified Supply Voltage – Coil2 Capacitance Power Supply Capacitor Biphase & Manchester Versions Supply Current C2 pad Modulator ON voltage drop C1 pad Modulator ON voltage drop PSK Version Supply Current PSK C2 pad Modulator ON voltage drop VDD VDDREC Cres Csup IDD VDD=5.0V IVDDC2=100µA with ref. to VDD IVDDC2=1mA with ref. to VDD IVDDC1=1mA with ref. to VDD = 2.8 VDC Modulator switch = “ON” Vcoil=100mVRMS f=10kHz The maximum voltage is defined by forcing – COIL2 The tolerance of the resonant capacitor ± 15% over the whole production. Optional reduced tolerance on request On a wafer basis, the tolerance ± 2% VDD = 1.5V, VSS = 0V, fcoil = 134kHz square wave, = 1.0V with positive peak at VDD and negative peak at VDD -1V unless otherwise specified Timings are derived from the field frequency and are specified as a number of RF periods. Parameter Read Bit Period Symbol Trdb Test Conditions depending on option Value 32, 16 Units RF periods

EM4200 Card

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF

A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

EM4200 Card, Key Fobs

EM4200 Card, Key Fobs

Introduction :

    • This RFID key-fob card is for RFID Proximity access control system keypad, with unique digit ID number in each key-fob card (This RFID card is read only and not rewritable.) which make it possible to records by the control system to implement the pre-set function such as door open , password management. 125KHz Proxy Card

Application:
These products are widely applied in access control system and related applications .

Specification :

  • Pre-programmed with unique digit ID number in each key fob card (This RFID card is read only and not rewritable.)
  • Frequency : 125KHz
  • Standard : EM4100 compatible
  • Contactless transmission of data
  • Material : PVC
  • Reading Distance: 5cm ~ 12cm
  • size: 85.6*54*0.76mm
  • weight:5.77g/PCS
  • Waterproof

EM4200 Key Fob

$27.50

EM4200 Key Fob, Pack of 25

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET

EM4200 KEY FOB

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET

EM4200 WRISTBAND

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.

Compared to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).

The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.

The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in a factory pre-programmed laser ROM.

  • Fully compatible with EM4100/4102 and EM4005/4105 communication protocols
  • 128 bit laser programmed ROM (64 and 96 bit option available)
  • Several options of data rate and data encoding: Manchester, Biphase, PSK and FSK
  • Several resonant capacitor integrated on chip (75pF, 210pF or 250pF mask option)
  • 100 to 150 kHz frequency range
  • On-chip rectifier and voltage limiter
  • No external supply buffer capacitor needed
  • -40°C to +85°C temperature range
  • Very low power consumption and High performances
  • EM 4200-FACT SHEET
  • EM4200 DATASHEET
  • RIFD Wristband Catalog

EM4205 Card, EM4305 Card

EM4205 Card, 4305 card, EM4100 Card, EM4102 Card, Compatible TK4100 Card, Compatible EM4102 Card is a CMOS integrated circuit intended for use in electronic Read/Write RF transponders.

Contactless Identification Card, Access Control Card, 125kmz access card, NFC Acces Control Card, RFID Access Card,

EM4205 WRISTBAND

EM4205 Card, 4305 cardEM4100 Card, EM4102 Card, Compatible TK4100 Card, Compatible EM4102 Card is a CMOS integrated circuit intended for use in electronic Read/Write RF transponders.

Contactless Identification Card, Access Control Card, 125kmz access card, NFC Acces Control Card, RFID Access Card,

• 512 bit EEPROM organised in 16 words of 32 bit
• 32 bit unique identifier (UID)
• 32 bit Password read and write protection
• ISO 11784 / 11785 Standard Compliant
• Lock feature converts EEPROM words in Read Only
• Two data encodings: Manchester and Biphase
• Multi-purpose data rate: 8, 16, 32 and 64 RF clocks
• Reader Talk First feature
• Compatible with EM4469 communication protocol
• 100 to 150 kHz frequency range
• On-chip rectifier and voltage limiter
• No external supply buffer capacitor needed
• -40°C to +85°C temperature range
• Very low power consumption
• Enlarged bumped pads (200 μm x 400 μm) for direct connection of coil (EM4305)
• EM4205: 2 resonant capacitor versions 210pF or 250pF selectable by mask option
• EM4305: 3 resonant capacitor versions 210pF, 250pF or 330pF selectable by mask

EM4450 EM4550 WRISTBAND

M4450 / EM4550

1 KBit Read/Write Contactless Identification Device

The EM4450/EM4550 is a CMOS integrated circuit intended for use in electronic Read/Write RF Transponders. The difference between EM4450 and EM4550 is that EM4550 are bumped and has megapads for the two coils. The chip contains 1 KBit of EEPROM which can be configured by the user, allowing a write inhibited area, a read protected area, and a read area output continuously at power on. The memory can be secured by using the 32 bit password for all write and read protected operations. The password can be updated, but never read. The fixed code serial number and device identification are laser programmed making every chip unique.

The EM4450/EM4550 will transmit data to the transceiver by modulating the amplitude of the electromagnetic field, and receive data and commands in a similar way. Simple commands will enable to write EEPROM, to update the password, to read a specific memory area, and to reset the logic.

The coil of the tuned circuit is the only external component required, all remaining functions are integrated in the chip.

1 KBit of EEPROM organized in 32 words of 32 bits
32 bit Device Serial Number (Read Only Laser ROM)
32 bit Device Identification (Read Only Laser ROM)
Power-On-Reset sequence
Power Check for EEPROM write operation
User defined Read Memory Area at Power On
User defined Write Inhibited Memory Area
User defined Read Protected Memory Area
Data Transmission performed by Amplitude Modulation
Two Data Rate Options 2 KBd (Opt64) or 4 KBd (Opt32)
Bit Period = 64 or 32 periods of field frequency
170 pF ± 2% on chip Resonant Capacitor
-40 to +85°C Temperature range
100 to 150 kHz Field Frequency range
On chip Rectifier and Voltage Limiter
No external supply buffer capacitance needed due to low power consumption
Available in chip form for mass production and PCB and CID package for samples.

Applications

-Ticketing
-Automotive Immobilizer with rolling code
-High Security Hands Free Access Control
-Industrial automation with portable database
-Manufacturing automation
-Prepayment Devices