NXP HITAG 2 CARD

HITAG 2 based transponders are highly integrated and do not need any additional
components beside the HITAG 2 transponder IC and the external coil. Data are
transmitted bidirectionally, in half duplex mode, between Read Write Device (RWD) and
HITAG transponder IC. To achieve a main stream security, data may be transmitted
enciphered. HITAG 2 transponder IC offer a memory of 256 bit.
Custom specific configuration of the transponder IC is possible by using the configuration
page. The configuration page allows the selection of different modes and access
possibilities and also the configuration of the memory. The pages of the memory can be
protected against read or write access by setting corresponding memory flags.
The HITAG 2 transponder IC provides – besides password and crypto mode – the following
three standard read only modes, that can be configured using the configuration byte:
• public-mode A
• public-mode B (animal identification, according to ISO 11784 and ISO 11785)
• public-mode C (PIT compatible mode PCF793x)

DataSheet

NXP

MIFARE

DESFire EV3, Plus EV2, Classic, Ultralight ,Ultralight C, SAM AV3, NXP JCOP41 , SmartMX, NTAG 424 DNA HITAG

mic ev ev ev ev car ge apple ibm boe bus

Product Description

HITAG 2

Hitag 2 Cards Key Features:
– Card dimensions: 85.5 x 54mm
– Thickness: 0.86±0.04mm
– Material: PVC, PET, ABS, PET-G, etc.
– Surface: lamination (gloss/mate)
– Chip: Hitag 2 (HT2 DC20 S20) Hitag2_Datasheet
– Function: Read/Write (protected by password)
– Memory size: 256-bits EEPROM with 32-bit serial number
– Frequency: 125KHz
– RF Protocol: N/A
– Data storage time: minimum 10 years
– Operating temperature: -20 to +60°C
– Storage temperature: -20 to +65°C
– ID Number Printing: Thermal printing/ DOD printing/ Laser engraving
– Package: 200pcs per Inner Box; 5,000pcs per Carton, each Carton gross weight is 35kgs
– Applications: Logistics, Asset tracking, Gas cylinder ID, Casino – gambling, Industrial automation