Showing 1–50 of 783 results

A Atmel T5577 Proximity Card

The ATA5577 is a contactless read/write identification IC (IDIC®) for applications in the 125-kHz or 134-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag. The on-chip 363-bit EEPROM (11 blocks with 33 bits each) can be read and written block-wise from a base station (reader). Data is transmitted from the IDIC (uplink) using load modulation. This is achieved by damping the RF field with a resistive load between the two terminals Coil 1 and Coil 2. The IC receives and decodes serial base station commands (downlink), which are encoded as 100% amplitude modulated (OOK) pulse-interval-encoded bit streams. A complete datasheet with further technical data is available on request. Please contact your local sales office.  

Blank or Printed Cards, Key Fobs, Wristband, Round Coin Tags & RFID Labels; We will offer you the Best Possible Pricing! Up to 65% OFF

 A True American Company! Selling Millions and Millions of SmartCard Around the World

Click: Quote Request

Please Call: 1-800-537-1708

Activation Adhesive Label for Smart Card

Card Activation Adhesive Label for SmartCard, Credit & Debit Card,

Adhesive Full-Color Label Layout for Credit Card, Debit Card, Any Card Labels specializes in the card industry, our activation label is one of the best of its kind to be explicitly created for plastic cards. It features a no-residue adhesive, excellent aging characteristics, and printable film and papers for personalization during or after application.
FEATURES
Clean removability from a wide variety of card surfaces
No residue
Excellent aging characteristics
Printable films and papers available
Available in high-capacity roll formats
Materials readily available for fast order turn
All type adhesives available
Custom print designs or blank for personalization after or during application
Please send a quote request with your artworks for best possible pricing.

Activation Labels for Credit Card & Debit Card

SmartCard America offers best-advanced adhesives Activation Labels for the Credit & Debit card, Gift Card, Membership Cards and Charge Cards industry. We manufacture the Smart Labels for the Smart Activation Solutions for our customers’ and offer the best pricing in the industry. Our solutions for Activation Sticker Labels are one of the excellent use in the United States.
We offer most advanced adhesive specialists in the card industry. Our activation label is exceptional of its kind to created for PVC Cards. Features NO-RESIDUE adhesive, excellent aging characteristics, and printable film and papers for personalization during or after application.

FEATURES
Credit Card Clean removability without residue
Easy Peel-Tab
Custom printed Layout
We offer in high-capacity roll formats
Best pricing in the industry

Labels Measurements: Lenth 76.2mm – Width: 25.4mm

Activation Labels Printed for Credit Card & Debit Card, Gift Card, Charge Card, RFID Printed Card, NFC Card Printed Card.

Lead Time: 8-14 Working Days After the Full Payment.

 

ALIEN HIGGS 3 Impinj Monza 5 RFID UHF Durable High-Temperature Metal Tag

$349.99$2,799.99

The RFID durable metal tag is specially designed for metallic asset tracking under extremely heat
and other harsh environments such as high-temperature disinfection, chemical cleaning, etc.
IP68 waterproof protection makes it survive well in the harsh outdoor environment.
With up to 10 meters reading distance and surviving in 225℃ high-temperature environment,
Widely used for asset management in various industrial fields, such as medical devices, surgical
instruments tray, heavy industry, oil&gas&mining, automatic production line, logistic tray
tracking, warehouse storage rack, container tracking, etc.

 

Monza 5 Tag Chip Datasheet R3 20160823

Datasheet

Alien Higgs 3 ALC-360 Higgs3 2014-12-21 (1) Datasheet

ALIEN HIGGS 3 Chip RFID UHF Metal Tag RCP8003

ALIEN G RFID WHITE WET INLAY (ALN-9654, HIGGS-3)

Powered by Alien’s break-through Higgs3 UHF RFID IC and innovative antenna design, the ALN-9654 delivers industry leading EPC Gen 2 performance and reliability. ALN-9654 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the “G” delivers ultra-high, “best-of-breed” performance. It is especially wellsuited for challenging materials with high-dielectrics, such as plastic and glass (hence the “G” nickname). The “G” inlay comprises a rich feature set including a 32-bit TID, a 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modifi cation of the tag’s data.

Data Sheet — Alien G RFID White Wet Inlay (ALN-9654, Higgs-3)

Why Buy?

The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.

FEATURES

  • Exceptional performance.
  • EPC Gen 2 (v1.2.0) compliant.
  • ISO/IEC 18000-6C compliant.
  • Worldwide RFID UHF operation (840-960MHz).
  • Higgs-3 IC with 800-bits of Nonvolatile Memory.
  • Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
  • User Memory can be Block Perma-Locked.
  • User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
  • Supports all Mandatory and Optional Gen 2 commands including item level
  • Custom commands for high speed programming.
  • Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.

ALIEN HIGGS 3 Chip UHF Metal Tag

ALIEN HIGGS 3 Chip UHF Metal Tag .860 / 960MHz Rfid Tag (RCP8003) Metal Tag(RCP8003) Introduction: This tag is designed on FR-4 base material. It solves the problem that tags can not be attached to metal surface(Reading distance even will be father when it is attached to metal surface). At the same time, it can work outside in the hard environment. It complaints with EPC C1G2 (ISO18000-6C), operating frequency is 860?960MHz (It can be used worldwide). Each tag has a unique ID and stores user data.

Quote Request

or

Please Call 1-800-537-1708

ALIEN HIGGS-3 Gen2 PVC UHF CARD

Alien Higgs-3 NFC CARD is a highly integrated single chip UHF RFID Tag IC. The chip conforms to the EPCglobal Class 1 Gen 2 specifications and provides state-of-the-art performance for a broad range of UHF RFID tagging applications.

Features
› Meets EPCglobal Gen2 (V 1.2.0) as well as ISO/IEC 18000-6C
› Worldwide operation in the RFID UHF bands (860-960 MHz)
› 800-Bits of Nonvolatile Memory
› 96-EPC Bits, extensible to 480 Bits
› 512 User Bits
› 64 Bit Unique TID
› 32 Bit Access and 32 bit Kill Passwords
› Pre-Programmed with a unique, unalterable 64-bit serial number
› User Memory can be Block Perma-Locked as well as read password protected in 64 Bit Blocks
› Supports all Mandatory and Optional Commands including Item Level Commands
› Custom Commands for high speed programming;
30 tags per second for the 96-bit EPC number
› Low power operation for both read and program
› Exceptional operating range, up to 10m with appropriate antenna

 

Quote Request

or

Please Call 1-800-537-1708

ALIEN HIGGS-3 RFID Labels or Card

The Alien Technology ALN-9654 G is an ultra-high-performance, general-purpose RFID inlay especially well-suited for high-dielectric materials such as windshields and reusable plastic pallets or containers.

  • Exceptional performance.
  • EPC Gen 2 (v1.2.0) compliant.
  • ISO/IEC 18000-6C compliant.
  • Worldwide RFID UHF operation (840-960MHz).
  • Higgs-3 IC with 800-bits of Nonvolatile Memory.
  • Pre-programmed with a unique, unalterable 64-bit serial number (ideal for authentication).
  • User Memory can be Block Perma-Locked.
  • User Memory can be Read Password protected in 64-bit blocks, prohibiting unintended Reads without an access password.
  • Supports all Mandatory and Optional Gen 2 commands including item level
  • Custom commands for high speed programming.
  • Available in high-yield, high-capacity dry/wet inlay rolls for high volume converting processes.

Alien Squiglette RFID Inlay, Labels, Card ALN-9730, Higgs-4

Powered by Alien®’s break-through Higgs™3 UHF RFID IC and innovative Squiglette antenna design, the ALN-9630 delivers industry leading EPC Gen 2 performance and reliability in a narrower width than it’s bigger brother, the Squiggle®, and makes it ideal for apparel applications. ALN-9630 inlays are World Tag compliant, enabling consistent operation across the diverse frequencies of the Americas, Europe, Middle East, Asia, and Africa. With its Higgs-3 core, the Squiglette delivers excellent performance and a rich feature set expanding the standard 32-bit TID with an additional 64-bit Unique TID for authentication and serialization applications, an extensible EPC memory bank, 512-bits of user memory for distributed data applications, and password protected read and write support capabilities to prevent unauthorized viewing and modification of the tag’s data. SPECIFICATIONS ELECTRICAL: Air Interface Protocol: EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) Operating Frequency: Global 840-960 MHz IC Type: Alien Higgs-3 Memory: EPC 96 bits, User 512 bits, TID 64 bits EPC Memory Content: Unique, randomized number Max Read Distance: > 3.04 m (10 ft) Applicable Surface Materials: Wood, plastic, glass, cardboard MECHANICAL: Tag Form Factor: White wet inlay Tag Materials: TT printable white film Attachment Method: General purpose adhesive Dimensions: 2.87 x 0.5 in (73 x 12.7 mm) Weight: < 1 g ENVIRONMENT: Operating Temperature: -40° to +70°C

Animal Ear Tag Pliers

$18.99

Animal RFID Ear Tag Pliers, Cattle RFID Ear Tag Pliers, Sheep RFID Ear Tag Pliers

  • Specifications: Green & Purple Color

  • 1.Perfect for signing small size for livestock or animals, such as pig, sheep, goat  and so on
  • 2. Apply in breeding population, epidemic prevention and control, meat quarantine, and all the field of information management for animals or livestock.
  • 3.Material: Aluminum Alloy
  • 4.Size: Approx 25×5.2x2cm
  • 5.Color: Green
  • Package included:
  • 1 x Ear Tag Plier
  • 1 x Needle
  • Perfect for signing small size for livestock or animals, such as pig, sheep, goat,dog and so on
  • Apply in the breeding population, epidemic prevention and control, meat quarantine, and all the field of information management for animals or livestock

 Animal Ear Tag Pliers,  Tag Pliers for Cattle RFID Tags, Sheep RFID Tags,   RFID Tags, Cow RFID Tags, Sheep RFID Tags and

 etc.

Material
Aluminum Alloy
Size
Approx 25×5.2x2cm
Color
Green, Purple

Special Sales

AT45DB041 Card

 

AT45DB041 Card

[themify_button style=”large green rounded” link=”https://smartcardamerica.com/?page_id=16650″ text=”#ffffff” target=”_blank” ]Request Quote[/themify_button]

AT45DB041D

Features
• Single 2.5V or 2.7V to 3.6V Supply
• RapidS Serial Interface: 66 MHz Maximum Clock Frequency
– SPI Compatible Modes 0 and 3
• User Configurable Page Size
– 256 Bytes per Page
– 264 Bytes per Page
– Page Size Can Be Factory Pre-configured for 256 Bytes
• Page Program Operation
– Intelligent Programming Operation
– 2,048 Pages (256/264 Bytes/Page) Main Memory
• Flexible Erase Options
– Page Erase (256 Bytes)
– Block Erase (2 Kbytes)
– Sector Erase (64 Kbytes)
– Chip Erase (4 Mbits)
• Two SRAM Data Buffers (256/264 Bytes)
– Allows Receiving of Data while Reprogramming the Flash Array
• Continuous Read Capability through Entire Array
– Ideal for Code Shadowing Applications
• Low-power Dissipation
– 7 mA Active Read Current Typical
– 25 μA Standby Current Typical
– 15 μA Deep Power-down Typical
• Hardware and Software Data Protection Features
– Individual Sector
• Sector Lockdown for Secure Code and Data Storage
– Individual Sector
• Security: 128-byte Security Register
– 64-byte User Programmable Space
– Unique 64-byte Device Identifier
• JEDEC Standard Manufacturer and Device ID Read
• 100,000 Program/Erase Cycles Per Page Minimum
• Data Retention – 20 Years
• Industrial Temperature Range
• Green (Pb/Halide-free/RoHS Compliant) Packaging Options

 

Quote Request

AT88SC0204C Card

AT88SC0204C Card

AT88SC0204C, CryptoMemory 2 Kbit

Features
• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 2-Kbit (256 Bytes) EEPROM User Memory

– Four 64-byte (512-bit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under License of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

 

AT88SC0404C Card

AT88SC0404C Card

AT88SC0404C, CryptoMemory 4 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC0808C Card

AT88SC0808C Card

AT88SC0808C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC102 Card

AT88SC102 Card

Features
• 1K X 1 Serial EEPROM with Security Logic
• Two Application Zones
• Stores and Validates Security Codes
• Maximum of Eight Incorrect Security Code Attempts
• Provides Transport Code Security
• Low Voltage Operation: 2.7V to 5.5V
• Manufactured using Low Power CMOS Technology
• Supports ISO/IEC 7816-3 Synchronous Protocol
• VPP Internally Generated
• 2 μs Read Access Time; 2 ms Write Cycle Time
• Temperature Range from -40°C to 85°C
• ESD Protection 4,000V Minimum.
• High Reliability:
100,000 Program/Erase Cycles Guaranteed
Data Retention of 10 years

Quote Request

AT88SC12816C Card

AT88SC12816C Card

AT88SC12816C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

AT88SC153 Card

AT88SC153 Card

Features
• One 64 x 8 (512-bit) Configuration Zone
• Three 64 x 8 (512-bit) User Zones
• Programmable Chip Select
• Low-voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 8-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-reset Register
• High-security Memory Including Anti-wiretapping

– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Secure Checksum
– Configurable Authentication Attempts Counter
– Two Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Four Password Attempts Counters
– Selectable Access Rights by Zone

• ISO Compliant Packaging
• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V min

• Low-power CMOS

Quote Request

AT88SC1608 Card

AT88SC1608 Card

Features
• One 128 x 8 (1K bit) Configuration Zone
• Eight 256 x 8 (16K bits) User Zones
• Low Voltage Operation: 2.7V to 5.5V
• Two-wire Serial Interface
• 16-byte Page Write Mode
• Self-timed Write Cycle (10 ms max)
• Answer-to-Reset Register
• High Security Memory Including Anti-wiretapping

– 64-bit Authentication Protocol (under exclusive patent license from ELVA)
– Authentication Attempts Counter
– Eight Sets of Two 24-bit Passwords
– Specific Passwords for Read and Write
– Sixteen Password Attempts Counters
– Selectable Access Rights by Zone

• ISO Compliant Packaging
• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 100 Years
– ESD Protection: 4,000V (min)

• Low-power CMOS

Quote Request

AT88SC1616C Card

AT88SC1616C Card

AT88SC1616C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC25616C Card

AT88SC12816C Card

AT88SC12816C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

Quote Request

 

AT88SC3216C Card

AT88SC3216C Card

AT88SC3216C, CryptoMemory 8 Kbit

Features:

• One of a Family of 9 Devices with User Memories from 1 Kbit to 256-Kbit
• 4-Kbit (512-byte) EEPROM User Memory

– Four 128-byte (1-Kbit) Zones
– Self-timed Write Cycle
– Single Byte or 16-byte Page Write Mode
– Programmable Access Rights for Each Zone

• 2-Kbit Configuration Zone

– 37-byte OTP Area for User-defined Codes
– 160-byte Area for User-defined Keys and Passwords

• High Security Features

– 64-bit Mutual Authentication Protocol (Under license of ELVA)
– Encrypted Checksum
– Stream Encryption
– Four Key Sets for Authentication and Encryption
– Eight Sets of Two 24-bit Passwords
– Anti-tearing Function
– Voltage and Frequency Monitor

• Smart Card Features

– ISO 7816 Class A (5V) or Class B (3V) Operation
– ISO 7816-3 Asynchronous T = 0 Protocol (Gemplus® Patent) *
– Multiple Zones, Key Sets and Passwords for Multi-application Use
– Synchronous 2-wire Serial Interface for Faster Device Initialization *
– Programmable 8-byte Answer-To-Reset Register
– ISO 7816-2 Compliant Modules

• Embedded Application Features

– Low Voltage Operation: 2.7V to 5.5V
– Secure Nonvolatile Storage for Sensitive System or User Information
– 2-wire Serial Interface
– 1.0 MHz Compatibility for Fast Operation
– Standard 8-lead Plastic Packages, Green Compliant (exceeds RoHS)
– Same Pinout as 2-wire Serial EEPROMs

• High Reliability

– Endurance: 100,000 Cycles
– Data Retention: 10 years
– ESD Protection: 4,000V min

 

Quote Request

AT88SC6416C Card

AT88SC6416C Chip Card

This AT88SC6416C White Gloss PVC card, is part of Atmel’s CryptoMemoryTM family of products. This new family of secure circuits offers a high security chip solution that fills the void between plain serial memories and microprocessors. It’s applications include ID cards, driving licenses, insurance cards, access control, administrative cards, campus cards, voting machines, e-purse, loyalty, energy meters, parking meters, transaction records and multi applications.

DATASHEET

Quote Request

Atmel AT24C02-ET Card

Features
• Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
1024 x 8 (8K) or 2048 x 8 (16K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• Automotive Devices Available
• 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead
SOT23, 8-lead TSSOP and 8-ball dBGA2 Packages
• Die Sales: Wafer Form, Waffle Pack and Bumped Wafers

Description
The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial
electrically erasable and programmable read-only memory (EEPROM) organized as
128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT24C01A/02/04/08A/16A is available in space-saving 8-lead
PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead SOT23
(AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages and is
accessed via a Two-wire serial interface. In addition, the entire family is available in
2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) versions.

Atmel AT93C46A Card

The AT93C46 provides 1024 bits of serial electrically erasable programmable read
only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG pin is
connected to VCC and 128 words of 8 bits each when it is tied to ground. The device
is optimized for use in many automotive applications where low power and low voltage
operations are essential.

Please Call Us For Quote!

Toll Free: 1-800-537-1708

Avansia Card Printer

$5,649.00

Part Number: AV1H0VVCBD

Avansia is a Retransfer technology card printer for very high-quality card delivery. Designed for rigorous use.  Avansia is extremely robust and provides high-security card issuance. Capable of issuing more than 140 single-sided color cards per hour. it is ideal for card issuance in medium and large quantities.

Robustness for high-security card issuance.

Avansia is a Retransfer technology direct-to-card printer for very high-quality card delivery. Designed for rigorous use, Avansia is extremely robust .and provides high-security card issuance.
Capable of issuing more than 140 single-sided color cards per hour. it is ideal for card issuance in medium and large quantities.

Avansia is ideal for delivering:

Corporate ID cards.

Secure access badges.

Student cards.

Payment cards.

Loyalty cards / gift cards.

National ID cards.

Driver’s licenses.

Click: avansia_kb-ava1-109-eng-us_rev_b2_1

Avery Dennison Intelligent RFID Labels

Avery Dennison  integrated global RFID approach is proven to increase inventory accuracy,
improve supply chain agility and enhance visibility across all channels.
When you choose Avery Dennison RFID, you get field-proven inlay products,
advanced research and testing capabilities, experienced engineering and technical
resources, and, most importantly, a partner with a deep understanding of what it
takes to make your application successful.
Sustainability is at the core of everything we do, from innovation and product design
to development and production. The majority of our inlays now feature our patented
SmartFace™ Technology, which is one of the most sustainable solutions on the
market, reducing your brand’s environmental impact.

Please Click the link Below:

LIST OF Product Model 

Please Provide us the INLAYS Part Number from the List of Product Model. Use the Quote Request Link below for more information.

QUOTE REQUEST

AWID KP 6840 Proximity Keypad Reader Series

AWID KP-6840 Proximity Keypad Reader Series

AWID single gang Keypad 125 kHz proximity reader, 6 to 8 inch Read Range